Smithco Super Star 42-00x (sn 4602 – 4660/12588 – 12627) P Manuel d'utilisateur télécharger pdf (Page 6)

Service

MAINTENANCE

Before servicing or making adjustments to machine, stop engine and remove key from ignition.

Use all procedures and parts prescribed by the manufacturer's. Read the engine manual.

LUBRICATION

Use No. 2 General purpose Lithium Base Grease and lubricate every 100 hours. The Super Star has two grease

fittings. One is located on the shift idler arm and one on the rod end of the attachment lift cylinder.

AIR CLEANER ON ENGINE

1. Unhook clips on both sides of cover and remove cover.

2. Carefully slide pre-cleaner of cartridge. To service pre-cleaner, wash in liquid detergent and water. Squeeze

dry in clean cloth. Saturate in engine oil. Squeeze in clean absorbent cloth to remove excess oil. Replace

if very dirty or damaged.

3. Remove knob and plate. Carefully remove cartridge to prevent debris form entering carburetor. To service

cartridge, clean by tapping gently on flat surface. Do not oil cartridge. Replace if very dirty or damaged.

Do not use petroleum solvents, e.g.., kerosene, which will cause cartridge to deteriorate. Do

not use pressurized air to clean cartridge. Pressurized air can damage cartridge.

4. Reinstall cartridge, plate and knob.

5. Reassemble pre-cleaner on cartridge.

6. Replace cover and reattach clips to body.

REMOTE AIR CLEANER

1. Unclip the two clips, remove the cover and pull out the element.

2. To service, clean by tapping gently on flat surface. Do not oil. Replace if very dirty or damaged.

3. Clean out the inside of the body and cover.

4. Place the element into the body and put the cover back on.

1 2 3 4 5 6 7 8 9 10 11 ... 127 128

Pas de commentaire

Smithco Super Star 42-00x (sn 4602 – 4660/12588 – 12627) P Manuel d'utilisateur Page 6